Bentley announces end to 12-cylinder engine production



(February 23, 2023) CREWE, England — Bentley has announced that it will cease production of its 12-cylinder petrolgas in April 2024, by which time more than 100,000 examples of the iconic W12 will have been handcrafted in the company’s Dream Factory in Crewe. The decision comes as part of Bentley’s acceleration towards a sustainable future through its Beyond100 strategy which will see the company’s entire model line fully electrified by the start of the next decade. 

This journey has already begun, with the introduction of the Bentayga and Flying Spur Hybrid models for which demand is exceeding the company’s expectations.  When production of the W12 ceases next year, Bentley’s entire model line will be available with the option of a hybrid powertrain.

Meanwhile, an engine first made available in the sector-defining Continental GT, which has been powering Bentley both metaphorically and literally for the last 20 years, will be consigned to history.

Bentley isn’t letting the W12 bow out without a dramatic send-off.  Development work has concluded recently on the most powerful version of the W12 ever created. The ultimate iteration of this mighty engine — destined for just 18 examples of the Bentley Batur to be handcrafted by Mulliner — is now confirmed as developing 750 PS (740 hp) and 1,000 Nm (738 pound-feet) of torque.  The increased torque figure forms the typical Bentley "torque plateau," running from 1,750 rpm to 5,000 rpm — with peak power at 5,500 rpm.

Bentley’s Chairman and Chief Executive, Adrian Hallmark, comments: “Our progressive journey towards sustainable luxury mobility means making changes to every area of Bentley Motors. When we first launched the W12 back in 2003, we knew we had a mighty engine that would propel both our cars and the brand forwards at speed. 20 years and more than 100,000 W12s later, the time has come to retire this now-iconic powertrain as we take strides towards electrification — but not without giving it the best send-off possible, with the most powerful version of the engine ever created.

“The 750 PS titan that Mulliner has created for the Batur marks the end of a development journey of which our engineering and manufacturing colleagues should be extremely proud, and when production finishes in April next year we aim to retrain and redeploy all of the skilled craftspeople who still build each engine by hand.”

Battling through an exceptionally grueling series of durability tests, the uprated engine has proven to be as reliable as ever and so will equip the most powerful road-going Bentley ever built.  While all Baturs are sold, a limited number of the 659 PS version of the W12 engine offered in the Speed versions of Continental GT, Bentayga and Flying Spur as well as the Continental GT Mulliner and Flying Spur Mulliner can still be ordered.

Demand for these final W12-powered Speed and Mulliner models is expected to be high, and customers eager to secure one of the last ever 12-cylinder Bentleys should contact their retailer with equal speed.

Bentley’s aim is to retrain and redeploy all 30 of the skilled craftspeople that hand-assemble and test every single W12 engine at Bentley’s carbon-neutral factory in Crewe. Meanwhile, the W12 engine production facility will make way for an expanded line for the completion of other Bentley engines used for the plug-in hybrid models.

Since the first introduction of the 6.0-liter, twin-turbocharged W12 in 2003, the engineering team in Crewe has continually improved the performance of the engine in terms of power, torque, emissions and refinement. Over the last 20 years, power has increased by 37 per cent and torque by 54 per cent, while emissions have been reduced by 25 per cent. Initially this was through evolution and optimization of the control systems, improvements in the oil and cooling designs, turbocharging technology and more effective injection and combustion processes.

For the launch of the Bentayga in 2015, the W12 was completely redesigned from the sump up, and it’s that version of the engine that remains in production today — featuring cylinder deactivation, direct and port injection, and twin-scroll turbos.

Each W12 engine is hand-built over 6.5 hours by a team of craftspeople before undertaking a highly sophisticated test regime of over an hour via three specialist diagnostic machines. Every week, one engine is run over an extended test cycle and then fully stripped for inspection.

The W12 engine facility will have delivered over 105,000 engines before reaching its 20th anniversary this year.